View FOD8342_8844852.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

to learn more about on semiconductor, please visit our website at www.onsemi.com please note: as part of the fairchild semiconductor integration, some of the fairchild orderable part numbers will need to change in order to meet on semiconductors system requirements. since the on semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the fairchild part numbers will be changed to a dash (-). this document may contain device numbers with an underscore (_). please check the on semiconductor website to verify the updated device numbers. the most current and up-to-date ordering information can be found at www.onsemi.com . please email any questions regarding the system integration to fairchild_questions@onsemi.com . is now part of on semiconductor and the on semiconductor logo are trademarks of semiconductor components industries, llc dba on semiconductor or its subsidiaries in the united states and/or other countries. on semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of on semiconductors product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. on semiconductor reserves the right to make changes without further notice to any products herein. on semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does on semiconductor assume any liability arising out of the application or use of any product or circuit, and specifcally disclaims any and all liability, including without limitation special, consequential or incidental damages. buyer is responsible for its products and applications using on semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by on semiconductor. typical parameters which may be provided in on semiconductor data sheets and/or specifcations can and do vary in different applications and actual performance may vary over time. all operating parameters, including typicals must be validated for each customer application by customers technical experts. on semiconductor does not convey any license under its patent rights nor the rights of others. on semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any fda class 3 medical devices or medical devices with a same or similar classifcation in a foreign jurisdiction or any devices intended for implantation in the human body. should buyer purchase or use on semiconductor products for any such unintended or unauthorized application, buyer shall indemnify and hold on semiconductor and its offcers, employees, subsidiaries, affliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that on semiconductor was negligent regarding the design or manufacture of the part. on semiconductor is an equal opportunity/affrmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner.
FOD8342, FOD8342t ? 3.0 a output current, high spee d gate drive optocoupler in stretched body sop 6-pin ?2015 fairchild semiconductor corporation www.fairchildsemi.com FOD8342, FOD8342t rev. 1.1 march 2016 FOD8342, FOD8342t 3.0 a output current, high speed gate drive optocoupler in stretched body sop 6-pin features ? FOD8342t - 8 mm creepage and clearance distance, and 0.4 mm insulation distance to achieve reliable and high-voltage insulation ? 3.0 a peak output current driving capability for medium- power igbt/mosfet ? use of p-channel mosfets at output stage enables output voltage swing close to supply rail ? 20 kv/ ? s minimum common mode rejection ? wide supply voltage range: 10 v to 30 v ? fast switching speed over full operating temperature range ? 210 ns maximum propagation delay ? 65 ns maximum pulse width distortion ? under-voltage lockout (uvlo) with hysteresis ? extended industrial temp erate range: -40c to 100c ? safety and regulatory approvals: ? ul1577, 5,000 v rms for 1 minute ? din en/iec60747-5-5, 1,140v peak working insulation voltage applications ? ac and brushless dc motor drives ? industrial inverter ? uninterruptible power supply ? induction heating ? isolated igbt/power mosfet gate drive related resources ? fod3182, 3 a output current, high speed mosfet gate drive optocoupler ? fod8314, fod8314t, 1.0 a output current, gate drive optocoupler in stretched body sop 6-pin ? www.fairchildsemi.com/p roducts/optoelectronics/ description the FOD8342 series is a 3.0 a output current gate drive optocoupler, capable of driving medium-power igbt/ mosfets. it is ideally suit ed for fast-switching driving of power igbt and mosfet us ed in motor-control inverter applications, and high-performance power systems. the FOD8342 series utilizes stretched body package to achieve 8 mm creepage and clearance distances (FOD8342t), and optimized ic design to achieve reliably high-insulation voltage and high-noise immunity. the FOD8342 series consists of an aluminum gallium arsenide (algaas) light-emitting diode (led) optically coupled to an integrated ci rcuit with a high-speed driver for push-pull mosfet output stage. the device is housed in a stretched body, 6- pin, small outline, plastic package. functional schematic figure 1. schematic figure 2. package outline 1 3 6 5 4 anode cathode v ss v o v dd 2
?2015 fairchild semiconductor corporation www.fairchildsemi.com FOD8342, FOD8342t rev. 1.1 2 FOD8342, FOD8342t ? 3.0 a output current, high spee d gate drive optocoupler in stretched body sop 6-pin truth table pin definitions pin configuration figure 3. pin configuration led v dd ? v ss ?positive going? (turn-on) v dd ? v ss ?negative going? (turn-off) v o off 0 v to 30 v 0 v to 30 v low on 0 v to 7 v 0 v to 6.5 v low on 7 v to 9.5 v 6.5 v to 9 v transition on 9.5 v to 30 v 9 v to 30 v high pin # name description 1 anode led anode 2 n.c not connection 3 cathode led cathode 4v ss negative supply voltage 5v o output voltage 6v dd positive supply voltage 1 3 6 5 4 anode cathode v ss v o v dd 2 n.c
?2015 fairchild semiconductor corporation www.fairchildsemi.com FOD8342, FOD8342t rev. 1.1 3 FOD8342, FOD8342t ? 3.0 a output current, high spee d gate drive optocoupler in stretched body sop 6-pin safety and insulation ratings as per din en/iec60747-5-5, this optocoupler is suitable for ?safe electrical insulation? only within the safety limit data. compliance with the safety ratings shall be ensured by means of protective circuits. parameter characteristics FOD8342 FOD8342t installation classifications per din vde 0110/1.89 table 1, for rated mains voltage < 150 v rms i?iv i?iv < 300 v rms i?iv i?iv < 450 v rms i?iii i?iv < 600 v rms i?iii i?iii climatic classification 40/100/21 40/100/21 pollution degree (din vde 0110/1.89) 2 2 comparative tracking index 175 175 symbol parameter value unit FOD8342 FOD8342t v pr input-to-output test voltage, method b, v iorm x 1.875 = v pr , 100% production test with t m = 1 s, partial discharge < 5 pc 1,671 2,137 v peak input-to-output test voltage, method a, v iorm x 1.6 = v pr , type and sample test with t m = 10 s, partial discharge < 5 pc 1,426 1,824 v peak v iorm maximum working insulation voltage 891 1,140 v peak v iotm highest allowable over-voltage 6,000 8,000 v peak external creepage ? 8.0 ? 8.0 mm external clearance ? 7.0 ? 8.0 mm dti distance through insulation (insulation thickness) ? 0.4 ? 0.4 mm safety limit values ? maxi mum values allowed in the event of a failure, t s case temperature 150 150 c i s,input input current 200 200 ma p s,output output power 600 600 mw r io insulation resistance at t s , v io = 500 v 10 9 10 9 ?
?2015 fairchild semiconductor corporation www.fairchildsemi.com FOD8342, FOD8342t rev. 1.1 4 FOD8342, FOD8342t ? 3.0 a output current, high spee d gate drive optocoupler in stretched body sop 6-pin absolute maximum ratings (t a = 25c unless otherwise specified.) stresses exceeding the absolute maximum ratings may damage the device. the device may not function or be operable above the recommended operating c onditions and stressing the parts to these levels is not recommended. in addition, extended exposure to stresses above the re commended operating conditions may affect device reliability. the absolute maximum ratings are stress ratings only. notes: 1. maximum pulse width = 10 ? s, maximum duty cycle = 0.2%. 2. no derating required across operating temperature range. 3. derate linearly from 25c at a rate of 5.2 mw/c. 4. functional operation under t hese conditions is not implie d. permanent damage may occur if the device is subjected to conditions outside these ratings. recommended oper ating conditions the recommended operating conditions table defines the conditions for actual device operation. recommended operating conditions are specified to ensure optimal perfor mance to the datasheet specif ications. fairchild does not recommend exceeding them or designing to absolute maximum ratings. symbol parameter value unit t stg storage temperature -40 to +125 c t opr operating temperat ure -40 to +100 c t j junction temperature -40 to +125 c t sol lead solder temperature (refer to reflow temperature profile) 260 for 10 sec c i f(avg) average input current 25 ma v r reverse input voltage 5.0 v i o(peak) peak output current (1) 3a v dd supply voltage -0.5 to 35 v v o(peak) peak output voltage 0 to v dd v t r(in) , t f(in) input signal rise and fall time 250 ns pd i input power dissipation (2)(4) 45 mw pd o output power dissipation (3)(4) 500 mw symbol parameter min. max. unit t a ambient operating temperature -40 +100 c v dd ? v ss supply voltage 10 30 v i f(on) input current (on) 10 16 ma v f(off) input voltage (off) -3.0 0.8 v
?2015 fairchild semiconductor corporation www.fairchildsemi.com FOD8342, FOD8342t rev. 1.1 5 FOD8342, FOD8342t ? 3.0 a output current, high spee d gate drive optocoupler in stretched body sop 6-pin isolation characteristics apply over all recommended conditions, typical value is measured at t a = 25c. notes: 5. device is considered a two terminal device: pins 1, 2 a nd 3 are shorted together and pins 4, 5 and 6 are shorted together. 6. 5,000 vac rms for 1 minute duration is equivalent to 6,000 vac rms for 1 second duration. electrical characteristics apply over all recommended conditions, typical value is measured at v dd = 30 v, v ss = ground, t a = 25c unless otherwise specified. notes: 7. in this test, v oh is measured with a dc load current of 100 ma. when driving capacitive load v oh will approach v dd as i oh approaches 0 a. 8. maximum pulse width = 1 ms , maximum duty cycle = 20%. symbol parameter conditions min. typ. max. unit v iso input-output isolation voltage t a = 25c, r.h. < 50%, t = 1.0 minute, i i-o ? 20 ? a (5)(6) 5000 vac rms r iso isolation resistance v i-o = 500 v (5) 10 11 ? c iso isolation capacitance v i-o = 0 v, frequency = 1.0 mhz (5) 1pf symbol parameter conditions min. typ. max. unit v f input forward voltage i f = 10 ma 1.1 1.5 1.8 v ? (v f /t a ) temperature coefficient of forward voltage -1.8 mv/c bv r input reverse breakdown voltage i r = 10 ? a5.0 v c in input capacitance f = 1 mhz, v f = 0 v 20 pf i oh high level output current (1) v oh = v dd ? 3 v 1.0 a v oh = v dd ? 6 v 2.5 a i ol low level output current (1) v ol = v ss + 3 v 1.0 a v ol = v ss + 6 v 2.5 a v oh high level output voltage (7)(8) i f = 10 ma, i o = -100 ma v dd ? 0.5 v dd ? 0.1 v v ol low level output voltage (7)(8) i f = 0 ma, i o = 100 ma v ss + 0.1 v ss + 0.5 v i ddh high level supply current v o = open, i f = 10 to 16 ma 2.9 4.0 ma i ddl low level supply current v o = open, v f = -3.0 to 0.8 v 2.8 4.0 ma i flh threshold input current low to high i o = 0 ma, v o > 5 v 2.0 7.5 ma v fhl threshold input voltage high to low i o = 0 ma, v o < 5 v 0.8 v v uvlo+ undervoltage lockout threshold i f = 10 ma, v o > 5 v 7.0 8.3 9.5 v v uvlo- i f = 10 ma, v o < 5 v 6.5 7.7 9.0 v uvlo hys undervoltage lockout threshold hysteresis 0.6 v
?2015 fairchild semiconductor corporation www.fairchildsemi.com FOD8342, FOD8342t rev. 1.1 6 FOD8342, FOD8342t ? 3.0 a output current, high spee d gate drive optocoupler in stretched body sop 6-pin switching characteristics apply over all recommended conditions, typical value is measured at v dd = 30v, v ss = ground, t a = 25c unless otherwise specified. notes: 9. propagation delay t phl is measured from the 50% level on the falling edge of the input pulse to the 50% level of the falling edge of the v o signal. 10. propagation delay t plh is measured from the 50% level on the rising edge of the input pulse to the 50% level of the rising edge of the v o signal. 11. pwd is defined as | t phl ? t plh | for any given device. 12. the difference between t phl and t plh between any two FOD8342 parts under the same operating conditions, with equal loads. 13. common mode transient immunity at outp ut high is the maximum tolerable nega tive dvcm/dt on the trailing edge of the common mode impulse signal, v cm , to ensure that the output remains high (i.e., v o > 15.0 v). 14. common mode transient immunity at output low is the ma ximum tolerable positive dvcm/dt on the leading edge of the common pulse signal, v cm , to ensure that the output remains low (i.e., v o < 1.0 v). symbol parameter conditions min. typ. max. unit t phl propagation delay time to logic low output (9) i f =10 ma, r g = 10 ? , c g = 10 nf, f = 250 khz, duty cycle = 50% 50 145 210 ns t plh propagation delay time to logic high output (10) 50 120 210 ns pwd pulse width distortion (11) | t phl ? t plh | 35 65 ns pdd (skew) propagation delay difference between any two parts (12) -90 90 t r output rise time (10% to 90%) 38 ns t f output fall time (90% to 10%) 24 ns t ulvo on ulvo turn on delay i f = 10 ma, v o > 5 v 2.0 ? s t ulvo off ulvo turn off delay i f = 10 ma, v o < 5 v 0.3 ? s | cm h | common mode transient immunity at output high v dd = 30 v, i f = 10 ma to 16 ma, v cm = 2000 v, t a = 25c (13) 20 50 kv/ ? s | cm l | common mode transient immunity at output low v dd = 30 v, v f = 0 v, v cm = 2000 v, t a = 25c (14) 20 50 kv/ ? s
?2015 fairchild semiconductor corporation www.fairchildsemi.com FOD8342, FOD8342t rev. 1.1 7 FOD8342, FOD8342t ? 3.0 a output current, high spee d gate drive optocoupler in stretched body sop 6-pin typical performan ce characteristics figure 4. output high voltage drop vs. output high current figure 5. output high voltage drop vs. ambient temperature figure 6. output high current vs. ambient temperature figure 7. output high current vs. ambient temperature figure 8. output low voltage vs. output low current figure 9. output low voltage vs. ambient temperature 0.0 0.5 1.0 1.5 2.0 2.5 -4 -3 -2 -1 0 f = 200 hz 0.2% duty cycle v dd - v ss = 15 v to 30 v i f = 10 ma to 16 ma 100 o c 25 o c t a = -40 o c v oh - v dd - output high voltage drop (v ) i oh - output high current (a) -40-20 0 20406080100 -0.30 -0.25 -0.20 -0.15 -0.10 -0.05 0.00 v dd - v ss = 15 v to 30 v i f = 10 ma to 16 ma i o = -100 ma v oh - v dd - output high voltage drop (v ) t a - ambient temperature ( o c) -40-20 0 20406080100 0 2 4 6 8 v o = v dd - 3 v f = 200 hz 0.2% duty cycle v dd - v ss = 15 v to 30 v i f = 10 ma to 16 ma v o = v dd - 6 v i oh - output high current (a ) t a - ambient temperature ( o c) -40-20 0 20406080100 0 2 4 6 8 v o = v dd - 3 v f = 100 hz 0.5% duty cycle v dd - v ss = 15 v to 30 v i f = 10 ma to 16 ma v o = v dd - 6 v i oh - output high current (a ) t a - ambient temperature ( o c) 0.0 0.5 1.0 1.5 2.0 2.5 0 1 2 3 4 -40 o c 25 o c f = 200 hz 99.8 % duty cycle v dd - v ss = 15 v to 30 v i f = 0 a v ol - output low voltage (v ) i ol - output low current (a) t a = 100 o c -40-20 0 20406080100 0.00 0.05 0.10 0.15 0.20 0.25 0.30 v dd - v ss = 15 v to 30 v v f = -3 v to 0.8 v i o = 100 ma v ol - output low voltage (v ) t a - ambient temperature ( o c)
?2015 fairchild semiconductor corporation www.fairchildsemi.com FOD8342, FOD8342t rev. 1.1 8 FOD8342, FOD8342t ? 3.0 a output current, high spee d gate drive optocoupler in stretched body sop 6-pin typical performan ce characteristics (continued) figure 10. output low current vs. ambient temperature figure 11. output low current vs. ambient temperature figure 12. supply current vs. ambient temperature figure 13. supply current vs. supply voltage figure 14. low-to-high input current threshold vs. ambient temperature figure 15. propagation delay vs. supply voltage -40-20 0 20406080100 0 2 4 6 8 v o = v ss + 3 v f = 200 hz 99.8% duty cycle v dd - v ss = 15 v to 30 v i f = 0 a v o = v ss + 6 v i ol - output low current (a ) t a - ambient temperature ( o c) -40-20 0 20406080100 0 2 4 6 8 v o = v ss + 3 v f = 100 hz 99.5% duty cycle v dd - v ss = 15 v to 30 v i f = 0 a v o = v ss + 6 v i ol - output low current (a ) t a - ambient temperature ( o c) -40-20 0 20406080100 2.0 2.4 2.8 3.2 3.6 i ddl (15 v) i ddh (15 v) i ddl (30 v) v dd - v ss = 15v to 30 v i f = 0 a (for i ddl ) i f = 10 ma (for i ddh ) i dd - supply current (ma ) t a - ambient temperature ( o c) i ddh (30 v) 15 20 25 30 2.0 2.4 2.8 3.2 3.6 i ddl i f = 0 a (for i ddl ) i f = 10 ma (for i ddh ) v ss = 0 v t a = 25 o c i dd - supply current (ma ) v dd - supply voltage (v) i ddh -40-20 0 20406080100 1.0 1.5 2.0 2.5 3.0 v dd - v ss = 15 v to 30 v v o = open i flh - low-to-high input current threshold ( ma ) t a - ambient temperature ( o c) 15 18 21 24 27 30 0 100 200 300 400 t plh i f = 10 ma to 16 ma r g = 10 ? , c g = 10 nf f = 250 khz 50% duty cycle t p - propagation delay (ns ) v dd - v ss - supply voltage (v) t phl
?2015 fairchild semiconductor corporation www.fairchildsemi.com FOD8342, FOD8342t rev. 1.1 9 FOD8342, FOD8342t ? 3.0 a output current, high spee d gate drive optocoupler in stretched body sop 6-pin typical performan ce characteristics (continued) figure 16. propagation delay vs. led forward current figure 17. propagation delay vs. ambient temperature figure 18. propagation delay vs. series load resistance figure 19. propagation delay vs. series load capacitance figure 20. transfer characteristics figure 21. input forward current vs. forward voltage 6 8 10 12 14 16 0 100 200 300 400 t plh v dd - v ss = 15 v to 30 v r g = 10 ? , c g = 10 nf f = 250 khz 50% duty cycle t p - propagation delay (ns ) i f - led forward current (ma) t phl -40-20 0 20406080100 0 100 200 300 400 t plh i f = 10 ma to 16 ma v dd - v ss = 15 v to 30 v r g = 10 ? , c g = 10 nf f = 250 khz 50% duty cycle t p - propagation delay (ns ) t a - ambient temperature ( o c) t phl 0 1020304050 0 100 200 300 400 t plh i f = 10 ma to 16 ma v dd - v ss = 15v to 30 v c g = 10 nf f = 250 khz 50% duty cycle t p - propagation delay (ns ) r g - series load resistance ( ? ) t phl 0 20406080100 0 100 200 300 400 t plh i f = 10 ma to 16 ma v dd - v ss = 15 v to 30 v r g = 10 ? f = 250 khz 50% duty cycle t p - propagation delay (ns ) c g - series load capacitance (nf) t phl 012345 0 5 10 15 20 25 30 35 v dd - v ss = 30 v t a = 25 o c v o - output voltage (v) i f - forward current (ma) 1e-3 0.01 0.1 1 10 100 0.6 0.8 1.0 1.2 1.4 1.6 1.8 -40 o c 25 o c v f - forward voltage (v ) i f - input forward current (ma) t a = 100 o c
?2015 fairchild semiconductor corporation www.fairchildsemi.com FOD8342, FOD8342t rev. 1.1 10 FOD8342, FOD8342t ? 3.0 a output current, high spee d gate drive optocoupler in stretched body sop 6-pin typical performan ce characteristics (continued) figure 22. under voltage lockout 0 5 10 15 0 5 10 15 (7.80 v) v o - output voltage (v) v dd - v ss - supply voltage (v) (8.30 v)
?2015 fairchild semiconductor corporation www.fairchildsemi.com FOD8342, FOD8342t rev. 1.1 11 FOD8342, FOD8342t ? 3.0 a output current, high spee d gate drive optocoupler in stretched body sop 6-pin test circuit figure 23. i ol test circuit figure 24. i oh test circuit i f = 0 a f = 200 hz duty cycle 99.8% 6 5 4 3 2 1 + - + - v dd v ol i ol 0.1f 47f 0.1f v o v in 47f 100 ? 100 ? 100 ? i f = 10 ma f = 200 hz duty cycle 0.2% 6 5 4 3 2 1 + - v dd v oh i oh 0.1f 47f 0.1f v o v in 47f + - 100 ?
?2015 fairchild semiconductor corporation www.fairchildsemi.com FOD8342, FOD8342t rev. 1.1 12 FOD8342, FOD8342t ? 3.0 a output current, high spee d gate drive optocoupler in stretched body sop 6-pin test circuit (continued) figure 25. v oh test circuit figure 26. v ol test circuit i f = 10 ma 6 5 4 3 2 1 + - v dd v oh 0.1f 100ma 6 5 4 3 2 1 + - v dd v ol 0.1f 100ma
?2015 fairchild semiconductor corporation www.fairchildsemi.com FOD8342, FOD8342t rev. 1.1 13 FOD8342, FOD8342t ? 3.0 a output current, high spee d gate drive optocoupler in stretched body sop 6-pin test circuit (continued) figure 27. i ddh test circuit figure 28. i ddl test circuit i f = 10 ma to 16 ma 6 5 4 3 2 1 + - v dd v o 0.1f i ddh v f = -3.0 v to 0.8 v 6 5 4 3 2 1 + - v dd v o 0.1f i ddl + -
?2015 fairchild semiconductor corporation www.fairchildsemi.com FOD8342, FOD8342t rev. 1.1 14 FOD8342, FOD8342t ? 3.0 a output current, high spee d gate drive optocoupler in stretched body sop 6-pin test circuit (continued) figure 29. i flh test circuit figure 30. v fhl test circuit figure 31. uvlo test circuit i f 6 5 4 3 2 1 + - v dd v o > 5v 0.1f 6 5 4 3 2 1 + - v dd v o < 5v 0.1f v f + - i f = 10 ma 6 5 4 3 2 1 + - v dd ramp v o = 5v 0.1f
?2015 fairchild semiconductor corporation www.fairchildsemi.com FOD8342, FOD8342t rev. 1.1 15 FOD8342, FOD8342t ? 3.0 a output current, high spee d gate drive optocoupler in stretched body sop 6-pin test circuit (continued) figure 32. t phl , t plh , t r and t f test circuit and waveforms figure 33. cmr test circuit and waveforms i f v out t plh t r t f 90% 50% 10% t phl 6 5 4 3 2 1 + - v dd v o 10nf 0.1f i f mon f = 250 khz duty cycle 50% 50 ? 10 ? t v cm v o switch at a: i f = 10 ma switch at b: i f = 0 ma v oh v o v ol 0v 6 5 4 3 2 1 + - v dd = 30 v v o 0.1f v cm = 2,000 v + - 5 v a b i f
?2015 fairchild semiconductor corporation www.fairchildsemi.com FOD8342, FOD8342t rev. 1.1 16 FOD8342, FOD8342t ? 3.0 a output current, high spee d gate drive optocoupler in stretched body sop 6-pin reflow profile figure 34. reflow profile profile freature pb-free assembly profile temperature minimum (t smin ) 150c temperature maximum (t smax ) 200c time (t s ) from (t smin to t smax ) 60 s to 120 s ramp-up rate (t l to t p ) 3c/second maximum liquidous temperature (t l ) 217c time (t l ) maintained above (t l ) 60 s to 150 s peak body package temperature 260c +0c / ?5c time (t p ) within 5c of 260c 30 s ramp-down rate (t p to t l ) 6c/s maximum time 25c to peak temperature 8 minutes maximum time (seconds) temperature (c) time 25c to peak 260 240 220 200 180 160 140 120 100 80 60 40 20 0 t l t s t l t p t p t smax t smin 120 preheat area maximum ramp-up rate = 3c/s maximum ramp-down rate = 6c/s 240 360
?2015 fairchild semiconductor corporation www.fairchildsemi.com FOD8342, FOD8342t rev. 1.1 17 FOD8342, FOD8342t ? 3.0 a output current, high spee d gate drive optocoupler in stretched body sop 6-pin ordering information all packages are lead free per jedec: j-std-020b standard. marking information part number package packing method FOD8342 stretched body sop 6- pin tube (100 units per tube) FOD8342r2 stretched body sop 6-pin tap e and reel (1,000 units per reel) FOD8342v stretched body sop 6-pin, din en/iec60747-5-5 option tube (100 units per tube) FOD8342r2v stretched body sop 6-pin, din en/iec60747-5-5 option tape and reel (1,000 units per reel) FOD8342t stretched body sop 6-pin, wide lead tube (100 units per tube) FOD8342tr2 stretched body sop 6-pin, wide lead tape and reel (1,000 units per reel) FOD8342tv stretched body sop 6-pin, wide lead, din en/iec60747-5-5 option tube (100 units per tube) FOD8342tr2v stretched body sop 6-pin, wide lead, din en/iec60747-5-5 option tape and reel (1,000 units per reel) 1 2 6 3 definitions 1 fairchild logo 2 device number, e.g. 8342 3 din en/iec60747-5-5 option (only appears on component ordered with this option) 4 two digit year code, e.g. ?15? 5 two digit work week ranging from ?01? to ?53? 6 assembly package code 8342 v xx yy 4 5 p
notes: unless otherwise specified a) no standard applies to this package b) all dimensions are in millimeters. c) dimensions do not include burrs or mold flash, and tie bar extrusion. d) dimensioning and tolerancing per asme y14.5m-2009. e) drawing file name: mkt-m06brev1 1.27 6.810.30 4.500.30 1.27 10.45 7.45 0.80 1.50 3.180.30 0.400.10 0.200.10 recommended land pattern pin 1 indicator (0.78) c a b 0.10 c 6x 6x (1.59) 45 6 321 10 4 6 3 1 0.20 c a b
notes: unless otherwise specified a) no standard applies to this package b) all dimensions are in millimeters. c) dimensions do not include burrs or mold flash, and tie bar extrusion. d) dimensioning and tolerancing per asme y 14.5m-2009. e) drawing file name: mkt-m06crev1 (2.54) 1.27 6.810.30 4.500.30 1.27 12.25 9.25 0.80 1.50 0.204~0.304 11.500.30 0.750.30 3.180.30 0.400.10 0.200.10 recommended land pattern pin 1 indicator r0.15 r0.15 0~8 (0.78) c a b 0.10 c 6x 6x (1.59) 10 0.20 c a b 45 6 321 46 31
www. onsemi.com 1 on semiconductor and are trademarks of semiconductor components industries, llc dba on semiconductor or its subsidiaries i n the united states and/or other countries. on semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . a listing of on semiconductor?s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent ? marking.pdf . on semiconductor reserves the right to make changes without further notice to any products herein. on semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does o n semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. buyer is responsible for its products and applications using on semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by on semiconductor. ?typical? parameters which may be provided in on semiconductor data sheets and/or specifications can and do vary in dif ferent applications and actual performance may vary over time. all operating parameters, including ?typic als? must be validated for each customer application by customer?s technical experts. on semiconductor does not convey any license under its patent rights nor the right s of others. on semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any fda class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. should buyer purchase or use on semicondu ctor products for any such unintended or unauthorized application, buyer shall indemnify and hold on semiconductor and its officers, employees, subsidiaries, affiliates, and distrib utors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that on semiconductor was negligent regarding the design or manufacture of the part. on semiconductor is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5817 ? 1050 www.onsemi.com literature fulfillment : literature distribution center for on semiconductor 19521 e. 32nd pkwy, aurora, colorado 80011 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative ? semiconductor components industries, llc

▲Up To Search▲

Price & Availability of FOD8342

	To Download FOD8342 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .